Finseen Cloud Technology IP Alarm System

  new Cloud based IP Alarm System---do not need gsm card,no monthly fees,truly plug&play 

FC-300 Cloud based IP Alarm Introduction

Feature:

1) Command for Arm delay,Alarm delay, Alarm zone with or without intellegent door sensor uploading open or close status function, active siren, close siren can be set through Internet.

2) Learn Remote Control and Detector ; Delete Remote Control and Detector.

3) Operate Alarm panel Away Arm,Home Arm, Disarm, Emergery Alarm through Internet.

4) Upload Status for Alarm panel: Away Arm, Home Arm, Disarm,Low voltage, Recovery of Low voltage, External power on, Cutting external power, Tamper-proof, Periodic upload(include Remote Control ID which operate Away Arm,Home Arm, Disarm).

5) Upload Low voltage of Detector, Alarm Zone,Tamper-Proof triggered.

6) Support setting alarm zone with intellegent door sensor  function: triggerred by open or close door, and upload Status of Alarm zone

7) Alarm siren keeping time is 2minutes.

8) Can be set with 10pcs of Remote Control ID

9) Can be set with 99 wireless zone, and each zone can

learn 1pc of accessories.

Operate very easy---Only within few minutes

Just download and install the "IP Alarm" app from Google Play or Apple App Store. Make sure the system is powered up and connected to the internet. Check that your mobile device is connected to the internet.

LED light: 
Light Off: without external power under Status of disarm.
Blue light keep on: external power working normal, under Status of disarm.
Blue light flash slowly: Status for Arm (slowly flash one time each 3seconds)
Blue light flash quickly: Status for Alarm (flash one time each 0.6second)
Red light on: Status of learning
Red light flash slowly: (Flash for 5times each second) learning successfully. 
Yellow Light off: power of battery is enough
Yellow light on: Low voltage for battery

Alarm Zone:
There is 100 alarm wireless zone in total for alarm panel.
00   : Wireless Remote control (10pcs in total)
01-19 : 24hours zone (19 wireless zone in total)
20-59 : Perimeter zone (40 wireless zone in total)
60-99 : Motion zone  (40 wireless zone in total)

 APP Interface

Package content

• Alarm panel*1(multi languages setting on APP)

• Wireless Door/Windows Sensor*1

• PIR Motion Infrared Detector*1

• Remote Control*1

Why Choose Finseen IP Cloud Alarm

How Cloud IP Alarm system FC-300 works?

Unlike most other home alarm system, there are not completely program number, alarm accessories adding code etc.

Our model FC-300 IP Cloud Alarm setup wizard will walk you through the install in just a few steps:

1)     Use the internet cable to connect Cloud IP Alarm host into router.

2)     Connect the power and turn on Alarm host.

3)     Install Finseen Alarm from Apple store or Google Play.

4)     Open Finseen Alarm APP and follow the guide

Now you can enter into the FC-300 home alarm manage setting for contact person, email address, adding sensors, Arm delay, Alarm delay etc.

Whether you are always working out or enjoying holiday far from your home or business, or only left elderly relatives stay at home, you will stay informed when any burglar enter into, not matter where you are.

For example, once any detector are triggered by burglar, you and registered mobile phone or email will get push message, phone alarm sound, and email alert immediately.

Or any families or friends, neighbors with authorized APP ID and password who do operation for the Cloud IP Alarm System, you can see all the operation history and alarm event history etc.

And you are also feel freely to set different levels on alarm notice methods for your families or neighbours.

FAQ

1. What iOS devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Iphone or Ipad which is with iOS 5.0 above.

2. What Android devices are compatible with the Finseen Cloud based IP Alarm system?

Compatible for Android 2.3 above.

3.   How do I set up the Finseen Cloud based IP Alarm system?

The system is a DIY [Do it yourself] system with a minimum of setup. Just download and install the "IP Alarm" app from Google Play or Apple App Store. Make sure the system is powered up and connected to the internet. Check that your mobile device is connected to the internet.

4.   How can I log in APP?

Turn back the alarm host, you can find the Alarm ID and password from the sticker.

Then enter the ID and password and follow the guide to enter into your account email, user name etc.

5.  How do I add/enroll new sensors after the installation?

Ensure the system under "disarm"mode,"

- Go to the menu ´Device' in the IP app

- Select '+´ to add Device

- Select the appropriate device illustrated.

- Press ´Enroll´ and follow the instructions in the Video.

- Wait for the confirmation from the server.

- After enroll, edit the location name of the device.

- Done…

6. How can I know if the enroll sensors is successful or fail?

If your enroll succeeded, Red light of alarm host will flash quickly for 5seconds and the acoustic buzzer sound with 5 beeps at same rate as red light flashes.

But if your Enroll failed, Red light of alarm hot will be off, and Acoustic buzzer sound 1.5 s.

7. How many sensors in maximum that I can enroll in total?

You can enroll in max.10 pcs Remote controls, 19 pcs Smoke detector or gas detector, 40 pcs Door /Window sensor and 40 pcs Motion detectors.

8. How can I change the password?

Go to "Set up "profile, and choose " change password".

Then enter the old password, followed by enter a new password. Repeat the new password to ensure correct entry.